GEPRC F411 35A AIO
Roll over image to zoom in
99,53€ VAT included
- Template: GEP-F4-35A
- MCU: STM32F411
- IMU: BMI270/accelerometer (SPI)
- OSD: Betaflight OSD con AT7456Ev
- MCU ESC: BB21F16G
- Continuous Current: 35A
- Input Voltage: 2~6S (LIPO battery)
- ESC protocol: Dshot300/600, oneshot, Multishot
- dimensions: card 32×32 mm
- Mounting Holes: 25,5 × 25,5 mm
- Weight: 8,8 g
GEP-F4-35A is developed on the basis of GEP-F4-20A. It can handle 35A of direct current as well (40A burst), Fully support 2-6S lipo battery. Can be used with motors 1204/1404/1507/1805/2004 and propellers from 2-5 inch. Support OSD parameter adjustment. It is ultralight from 8,8 g and mounting holes from 25,5 mm * 25,5 mm, suitable for most of the frames on the market.
Change log:
14 June 2022: gyroscope upgraded to BMI270.
25 June 2022: mounting hole size changed from 26.5×26.5mm to 25.5×25.5mm.
Specifications
- Template: GEP-F411-35A AIO
- MCU: STM32F411
- IMU: BMI270/accelerometer (SPI)
- Destination: GEPRC_F411_AIO
- OSD: Betaflight OSD con AT7456Ev
- UART gate: T1 R1 / T2 R2
- Beep: AND
- LED: AND
- USB connector: micro USB
- MCU ESC: 8BB21F16G
- Integrated LC Filter
- Continuous Current: 35A
- Burst Current: 40 A (10 s)
- Input Voltage: 2~6S (LIPO battery)
- ESC protocol: Dshot300/600, oneshot, Multishot
- Black box: 16 Mb
- ESC objective: G_H_30 BLS
- dimensions: card 32×32 mm
- Mounting Holes: 25,5 × 25,5 mm
- Weight: 8,8 g
Features:
- BLhelis_ S 35A ESC, supports the input of the LIPO 2-6S battery, can handle a DC current of 35 A (burst of 40 A), with current meter.
- Mainstream STM32F411 FC and runs stably.
- BMI270 gyroscope with 8K sampling rate.
- Rich exterior doors, supports buzzer and LED light function.
- Mounting holes from 25,5 mm * 25,5 mm and ultralight weight, suitable for most of the frames on the market.
Package Included
- 1 x GEP-F4-35A-AIO
- 1 XT30-7CM-18AWG cable
- 1 capacity 35V220UF
- 8 damping rings M2 * 6,5 mm
Manual:
Additional information
Brand names | GEPRC |
---|---|
PROCESSOR | F4 |
BATTERY SIZE | 25.5X25.5 |
AMPERAGE | 35A |
FIRMWARE ESC | BLHeli_S |
CONNECTOR | USB |
GYRO | BMI270 |
UART | 2 |
VOLTAGE (V) | LiPo 2S/7.4V, LiPo 3S/11.1V, LiPo 4S/14.8V, LiPo 6S/22.2V |
RECEIVER | NO Rx |
by Luigi Rosario Amati (verified owner)
Helpful and qualified staff