Rekon FPV Rekon5 5″ Mini LR 6s

299,99339,98 VAT included

Out of stock

  • PNP
  • FRSKY R-XSR
  • TBS NANO RX SE
Clear

The Recon 5 is an analog quadcopter from 5 inches that comes with the motors 2004 1800KV (6S).

The Rekon5 is based on the original design Dave_C FPV MiniLongRange. This five-inch platform is an evolution of the MicroLongRange concept adapted to carry more payload. Like its smaller cousin from 4 inch, this platform from 5 inches can achieve flight times of over 25 minutes while being very quiet, efficient and relatively low cost compared to quads from 7 inches which are usually used for long haul flights.

The main advantage of the 5″ compared to 4″ is the ability to carry loads like GoPro and Li-ion batteries without impacting too much flight performance and noise level. Moreover, cruising speed is increased and the ability to perform aerobatic maneuvers in freestyle is significantly improved. This platform can also be used with a wider variety of batteries depending on the intended use: 850-1800 mAh on the 4S version and 550-1300 mAh on the 6S version will work without problems. Both versions are also compatible with 4S lithium-ion packages from 3000 mAh if you are looking for maximum flight time.

Note: action cam (as seen in the photo) NOT included.

 

VIDEO: Rekon5 Mini LongRange review by 5 inch

Features

  • A lightweight frame with aluminum hardware from 10 mm, compact main body with split bridge spacer from 25/20 mm for double piles 20×20
  • Delicate dead cat design reduces the props in sight without affecting flight performance
  • Foldable crossfire immortal T-stand inspired by Alexandre Arvinte (@ ledrone.club)
  • Optional mounts for better vibration damping and impact resistance
  • Optimized for engines 2004 – 2204 with M2 12 connections×12
  • Shock absorbing TPU front with integrated GoPro support
  • Support for external buzzer for Buzzer
  • GPS support for GPS M80

 

REKON5 FRAME

The RECON 5 features an innovative frame design that uses one-piece front and rear arms locked by an aluminum bolt. The bolt is used to create a strong and rigid center section of the frame, locking the arms and decoupling the forces from the rest of the frame. This allows you to use very light M2 hardware and thin carbon plates on the other parts of the frame, reducing overall weight for maximum efficiency. Moreover, the bolt allows a much greater torque to be applied and is not subject to breakage or often happens with M2 or M3 striped hardware. Much attention was also paid to the design of the front and the camera attachment. The frames of dead cats are inherently prone to severe impacts in this area since the arms are moved backwards and the front is exposed. This is why REKON5 uses a hose,

Technical specifications

  • Net weight: 218,5 g (weight without receiver)
  • Receiver: PNP o TBS Crossfire

REKON5 FREESTYLE FRAME 5″.

  • Kind: 5″.
  • Wheelbase: 210 mm
  • Support for propellers: until 5 inch
  • Overall dimensions: 210 * 155 mm
  • Weight: 53 g (even TPU)

ZEUS F722 MINI FLIGHT CONTROLLER

  • MPU: MPU6000
  • CPU:STM32F722 RET6
  • Input Voltage: 3-6S Lipo
  • BEC Output: 5 V/3 A, 9 V/2 A
  • Weight: 8,1 g

ZEUS 30A BL32 3-6S 4in1 ESC

  • CPU:STM32F051
  • Input Voltage: 3-6S Lipo
  • constant Current: 30 A
  • Peak current: 35 A(10 sec)
  • Weight: 7 g

ZEUS VTX 800 mW

  • Output power: PIT/25/100/200/400/800 mW
  • Entrance: CC 6-26 V
  • Antenna: MMCX
  • Weight: 4,8 g

FOTOCAMERA CADDX RATEL V2

  • Image Sensor: 1/1.8 CMOS″ 1200TVL
  • Input power: CC 5 V
  • dimensions: 19 mm * 19 mm * 20 mm
  • Net weight: 5,9 g

2004 MOTORE BRUSHLESS 1800KV (6S).

  • Recommended prop (inch): 5 inch
  • Weight: 15,5 g

GPS M80

  • Supply: 5V
  • dimensions: 18,5 mm x 18,5 mm x 7,1 mm
  • Weight: 9,4 g

ACOUSTIC SIGNAL FPV SOTER

  • Input Voltage: 5V
  • dimensions: 22 mm x 12 mm x 12 mm
  • Weight: 4 g

GEMFAN 5125 5″ 3 PROPELLER BLADES

  • Quantity: 4 CW e 4 CCW

Package Included

  • 1x Recon FPV Rekon5 5″ Mini LR Analog quadcopter with Caddx Ratel V2 – 6S (choose receiver)
  • 1x SMA internal needle Small hammer antenna (RHCP)
  • 1x Soter FPV drone buzzer
  • 1x supporto TPU Naked Gopro
  • 1x receiver (optional).
  • 8x GEMFAN 5125
  • 2 battery straps
  • 1x GPS M80
  • Note: the action cameras shown in the pictures are not included.

PLEASE NOTE: TO ENSURE MAXIMUM QUALITY, EACH MODEL WILL BE INSPECTED BY OUR STAFF BEFORE IT IS SHIPPED.

Additional information

Brand names

HGLRC

Receiver

PNP, FRSKY R-XSR, TBS NANO RX SE

Be the first to review “Rekon FPV Rekon5 5″ Mini LR 6s”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Main Menu

299,99339,98 VAT included

×

How can we help you?

If you want more shipping information, payments, returns and sizes can read here. If you want assistance you can write us an email on info@drone24hours.com O Whatsapp by clicking below.

×